第二份英文作業/2016.08.29-2017.01.22/莊惟智:修訂版本之間的差異

出自六年制學程
跳轉到: 導覽搜尋
week 44: 10/31-11/06
week 43: 10/24-10/30
第 103 行: 第 103 行:
 
*本週進度:Roboeve, a Beijing-based...camera and facial recognition.
 
*本週進度:Roboeve, a Beijing-based...camera and facial recognition.
 
*大意:Roboeve是一群在北京的年輕工程師和工業設計師團隊,可能是我們所看過的最可愛的小型機器人之一。 這個機器人稱為Xpider,使用3D列印的技術,和一些有趣的功能,如相機和人臉識別。
 
*大意:Roboeve是一群在北京的年輕工程師和工業設計師團隊,可能是我們所看過的最可愛的小型機器人之一。 這個機器人稱為Xpider,使用3D列印的技術,和一些有趣的功能,如相機和人臉識別。
*獨輪車01:13~  
+
*獨輪車01:13~6:02
 
<videoflash>bGC0SBtOvg4</videoflash>
 
<videoflash>bGC0SBtOvg4</videoflash>
 
**jump mount exercise#2 jump practice(起跳上車第二步跳上練習)
 
**jump mount exercise#2 jump practice(起跳上車第二步跳上練習)

2016年11月3日 (四) 23:22的修訂版本

week 35: 8/29-9/04

  • 3D列印原文:WinSun China unveils fully 3D printed public toilets in Suzhou
  • 本週進度:Visitors to China's.....in Suzhou, China.
  • 大意:遊客到中國的大楊山現在有了可以輕鬆休息的地方了,因為中國winsun印製了第一個用3D列印打造的公共廁所。令人印象深刻的是,從內部到外部都用3D列印打造,對沒錯3D列印約翰尼在現場,3D列印的洗手間(這樣可能會讓很多人有要去廁所的理由)後來又被定成大楊山上的旅遊景點
  • 獨輪車:

Uni.JPG

week 36: 9/05-9/11

  • 3D列印原文:WinSun China unveils fully 3D printed public toilets in Suzhou WinSun China unveils fully 3D printed public toilets in Suzhou]
  • 本週進度:If you’re wondering where...improve its public toilets
  • 大意:如果你想知道這個3D列印廁所的點子從哪裡來,這不是意外產生的點子,這是中國國家旅遊所正在推動一個馬桶革命以旅遊為目的改善整個國家的公共廁所
  • 獨輪車00:00-00:28
  • (make a sharp 90 turn to the right)向右轉九十度角
  • (make a sharp 90 turn to the left)向左轉九十度角
  • (ride a circle)繞圈
  • (jump)行進中起跳
  • (ride with the stomach on the seat)行進中把肚子貼在椅子上
  • (hip)跳下
  • (hop)跳上
  • (hip/hop over a step)跳上下越過一個臺階

week 37: 9/12-9/18

  • 3D列印原文:WinSun China unveils fully 3D printed public toilets in Suzhou
  • 本週進度In fact, just one year ago...3D printed toilet design).
  • 其實,就在一年前在中國的國際旅遊展,精選攜帶式廁所展中的幾個設計師介紹了全新的和創新的馬桶設計(讀者可能會得記得這個3D列印的廁所)
  • 獨輪車00:28-01:00
  • side hop(側跳)
  • hop-twist 90 to the left(原地往左跳90度)
  • hop-twist 90 to the right(原地往右跳90度)
  • hop-twist 180 to the left(原地向左跳180度)
  • hop-twist 180 to the right(原地向右跳180度)
  • hop standing on the wheel(跳上輪子)

week 38: 9/19-9/25

  • 3D列印原文:WinSun China unveils fully 3D printed public toilets in Suzhou
  • 本週進度:WinSun’s own 3D printed...even harmonious with it.
  • 大意:WinSun擁有的3D打印的廁所結果被提出為新的和創新的廁所系統的希望,就如同前面的,新的公共廁所已經在大洋山的蘇州設立了,引來了大批人潮。注意著當地環境,WinSun想要創造的是能與大自然和諧共處的東西。(惟:這樣子蓋不但不能和大自然共處反而會更突兀吧!!)
  • 獨輪車01:00-02:00
  • side hop(側跳)
  • hop-twist 90 to the left(原地往左跳90度)
  • hop-twist 90 to the right(原地往右跳90度)
  • hop-twist 180 to the left(原地向左跳180度)
  • hop-twist 180 to the right(原地向右跳180度)
  • hop standing on the wheel(跳上輪子)

week 39: 9/26-10/02

  • ride whith the seat out in front(前推、行進當中將椅子往前推)
  • ride whith the seat out in back(後推、行進當中將椅子後推)
  • ride whith the seat out in the front in a figure 8(前推繞8字)
  • ride whith the seat out in the back in a figure 8(後推繞8字)
  • static mount(上車起步)
  • roll back mount(定車上車)
  • rolling mount(快速上車)

week 40: 10/03-10/09

  • 3D列印原文:WinSun China unveils fully 3D printed public toilets in Suzhou
  • 本週進度:Impressively, the whole...put the pieces together.
  • 大意:令人印象深刻的是,整個公共廁所的地下網路設施,建築的從裡到外,甚至是周圍的裝飾受用印的,使WinSun有名,廁所的所有零件都是先在工廠列印,然後再送過去方便組裝,即使是組裝也只需要一台吊車、三名工人與較少的工具就可以順利組裝了。
  • 獨輪車03:05-04:06
  • side mount reverse(後側跨上車)
  • side mount(側跨上車)
  • back mount(反向上車)
  • jump mount(起跳上車)
  • mount to seat in front(前推上車)
  • kick up mount(勾起上車)
  • pick up mount(前挑上車)
  • floor mount(反向原地上車)
  • site mount leg around(側跨上車後腳繞椅子)
  • jugging with 3 ball(雜耍)
  • jugging on a unicycle(在獨輪車上雜耍)

week 41: 10/10-10/16

  • 3D列印原文:WinSun China unveils fully 3D printed public toilets in Suzhou
  • 本週進度:WinSun also used its 3D printing...and ancillary facilities.
  • 大意:WinSun業運用了3D列印的系統做了排水溝的一部份,在大楊山上3D列印的排水溝並不是第一次才運作的,然而,WinSun也正在尋找著許多城市中可以使用3D列印的場所,包含城市中的供水設施、排水溝、衛生設備、壯麗景觀、地下鐵、共用設施以及一整組的設施。
  • 獨輪車00:00~00:41
    • first step learn a nomal jump mount(一開始先學習一般的跳要上車)
    • position pedals parallel to ground(把踏板調到與地板平行)
    • put one hand to the front of the unicycle(一手先抓住獨輪車的椅子前面)

week 42: 10/17-10/23

    • feet shoulder with apart,both equeidistant from wheel(兩腳腳尖分開;兩側與車輪同寬)
    • jump hight;come down vertically(跳高;垂直下來 補充:從獨輪車上方)
    • practice on both sides(踩上兩邊踏板)

week 43: 10/24-10/30

  • 3D列印原文:Meet Xpider, the smallest, cutest programmable 3D printed robot spider you've ever seen
  • 本週進度:Roboeve, a Beijing-based...camera and facial recognition.
  • 大意:Roboeve是一群在北京的年輕工程師和工業設計師團隊,可能是我們所看過的最可愛的小型機器人之一。 這個機器人稱為Xpider,使用3D列印的技術,和一些有趣的功能,如相機和人臉識別。
  • 獨輪車01:13~6:02
    • jump mount exercise#2 jump practice(起跳上車第二步跳上練習)
    • 1turn uni 1/2 way around(將獨輪車原地轉半圈)
    • the spin(選轉)
    • the jump(跳)

week 44: 10/31-11/06

  • 3D列印原文:Meet Xpider, the smallest, cutest programmable 3D printed robot spider you've ever seen
  • 本週進度:Roboeve was first founded as...spider robot in the world.
  • 大意:Roboeve是一群才剛畢業的機器人愛好者所成立的藉此來尋找著彼此的熱情。是由六個成員所組成(Binbin, Zongyi, Tianye, Louise, Cara和Anna)這個團隊成功的製造出一個小蜘蛛機器人這是最讓大家驚喜的。關於Xpider的身高是85mm(8.5cm),重量只有150克,Roboeve甚至還要高價賣出全世界最小可以編輯程式的蜘蛛機器人。(看到這我就氣,他們仿造hexbug公司的產品居然還想高價賣出?)
  • 獨輪車

week 45: 11/07-11/13

week 46: 11/14-11/20

week 47: 11/21-11/27

week 48: 11/28-12/04

week 49: 12/05-12/11

week 50: 12/19-12/25

week 51: 12/26-01/01

week 01: 01/02-01/08

week 02: 01/09-01/15

week 03: 01/16-01/22