檢視第二份英文作業/2016.08.29-2017.01.22/莊惟智的原始碼

===week 35: 8/29-9/04===
*3D列印原文:[http://www.3ders.org/articles/20160901-winsun-china-unveils-fully-3d-printed-public-toilets-at-da-yang-mountain-suzhou.html WinSun China unveils fully 3D printed public toilets in Suzhou]
*本週進度:Visitors to China's.....in Suzhou, China.
*大意:遊客到中國的大楊山現在有了可以輕鬆休息的地方了，因為中國winsun印製了第一個用3D列印打造的公共廁所。令人印象深刻的是，從內部到外部都用3D列印打造,對沒錯3D列印約翰尼在現場,3D列印的洗手間(這樣可能會讓很多人有要去廁所的理由)後來又被定成大楊山上的旅遊景點
*獨輪車:
[[檔案:Uni.JPG|250px]]

===week 36: 9/05-9/11===
*3D列印原文:[http://www.3ders.org/articles/20160901-winsun-china-unveils-fully-3d-printed-public-toilets-at-da-yang-mountain-suzhou.html WinSun China unveils fully 3D printed public toilets in Suzhou] WinSun China unveils fully 3D printed public toilets in Suzhou]
*本週進度:If you’re wondering where...improve its public toilets
*大意:如果你想知道這個3D列印廁所的點子從哪裡來,這不是意外產生的點子,這是中國國家旅遊所正在推動一個馬桶革命以旅遊為目的改善整個國家的公共廁所
*獨輪車00:00-00:28
<videoflash>AWUhdXjees0</videoflash>
*(make a sharp 90 turn to the right)向右轉九十度角
*(make a sharp 90 turn to the left)向左轉九十度角       
*(ride a circle)繞圈              
*(jump)行進中起跳
*(ride with the stomach on the seat)行進中把肚子貼在椅子上
*(hip)跳下                          
*(hop)跳上                      
*(hip/hop over a step)跳上下越過一個臺階

===week 37: 9/12-9/18===
*3D列印原文:[http://www.3ders.org/articles/20160901-winsun-china-unveils-fully-3d-printed-public-toilets-at-da-yang-mountain-suzhou.html WinSun China unveils fully 3D printed public toilets in Suzhou]
*本週進度In fact, just one year ago...3D printed toilet design).
*其實,就在一年前在中國的國際旅遊展,精選攜帶式廁所展中的幾個設計師介紹了全新的和創新的馬桶設計(讀者可能會得記得這個3D列印的廁所)
*獨輪車00:28-01:00
<videoflash>AWUhdXjees0</videoflash>
*side hop(側跳)
*hop-twist 90 to the left(原地往左跳90度)
*hop-twist 90 to the right(原地往右跳90度)
*hop-twist 180 to the left(原地向左跳180度)
*hop-twist 180 to the right(原地向右跳180度)            
*hop standing on the wheel(跳上輪子)

===week 38: 9/19-9/25===
*3D列印原文:[http://www.3ders.org/articles/20160901-winsun-china-unveils-fully-3d-printed-public-toilets-at-da-yang-mountain-suzhou.html WinSun China unveils fully 3D printed public toilets in Suzhou]
*本週進度:WinSun’s own 3D printed...even harmonious with it.
*大意:WinSun擁有的3D打印的廁所結果被提出為新的和創新的廁所系統的希望，就如同前面的，新的公共廁所已經在大洋山的蘇州設立了，引來了大批人潮。注意著當地環境，WinSun想要創造的是能與大自然和諧共處的東西。(惟:這樣子蓋不但不能和大自然共處反而會更突兀吧!!)
*獨輪車01:00-02:00
<videoflash>AWUhdXjees0</videoflash>
*side hop(側跳)
*hop-twist 90 to the left(原地往左跳90度)                   
*hop-twist 90 to the right(原地往右跳90度)
*hop-twist 180 to the left(原地向左跳180度)
*hop-twist 180 to the right(原地向右跳180度)            
*hop standing on the wheel(跳上輪子)

===week 39: 9/26-10/02===
*3D列印原文:[http://www.3ders.org/articles/20160901-winsun-china-unveils-fully-3d-printed-public-toilets-at-da-yang-mountain-suzhou.html WinSun China unveils fully 3D printed public toilets in Suzhou]
*本週進度:That is, rather than a conspicuous line... what the structure was.
*大意:
*獨輪車02:00-03:05
<videoflash>AWUhdXjees0</videoflash>
*ride whith the seat out in front(前推、行進當中將椅子往前推)
*ride whith the seat out in back(後推、行進當中將椅子後推)
*ride whith the seat out in the front in a figure 8(前推繞8字)
*ride whith the seat out in the back in a figure 8(後推繞8字)
*static mount(上車起步)
*roll back mount(定車上車)
*rolling mount(快速上車)

===week 40: 10/03-10/09===
*3D列印原文:[http://www.3ders.org/articles/20160901-winsun-china-unveils-fully-3d-printed-public-toilets-at-da-yang-mountain-suzhou.html WinSun China unveils fully 3D printed public toilets in Suzhou]
*本週進度:Impressively, the whole...put the pieces together.
*大意:令人印象深刻的是，整個公共廁所的地下網路設施，建築的從裡到外，甚至是周圍的裝飾受用印的，使WinSun有名，廁所的所有零件都是先在工廠列印，然後再送過去方便組裝，即使是組裝也只需要一台吊車、三名工人與較少的工具就可以順利組裝了。
*獨輪車03:05-04:06
<videoflash>AWUhdXjees0</videoflash>
*side mount reverse(後側跨上車)
*side mount(側跨上車)
*back mount(反向上車)
*jump mount(起跳上車)
*mount to seat in front(前推上車)
*kick up mount(勾起上車)
*pick up mount(前挑上車)
*floor mount(反向原地上車)
*site mount leg around(側跨上車後腳繞椅子)
*jugging with 3 ball(雜耍)
*jugging on a unicycle(在獨輪車上雜耍)

===week 41: 10/10-10/16===
*3D列印原文:[http://www.3ders.org/articles/20160901-winsun-china-unveils-fully-3d-printed-public-toilets-at-da-yang-mountain-suzhou.html WinSun China unveils fully 3D printed public toilets in Suzhou]
*本週進度:WinSun also used its 3D printing...and ancillary facilities.
*大意:WinSun業運用了3D列印的系統做了排水溝的一部份，在大楊山上3D列印的排水溝並不是第一次才運作的，然而，WinSun也正在尋找著許多城市中可以使用3D列印的場所，包含城市中的供水設施、排水溝、衛生設備、壯麗景觀、地下鐵、共用設施以及一整組的設施。
*獨輪車00:00~00:41
<videoflash>bGC0SBtOvg4</videoflash>
**first step learn a nomal jump mount(一開始先學習一般的跳要上車)
**position pedals parallel to ground(把踏板調到與地板平行)
**put one hand to the front of the unicycle(一手先抓住獨輪車的椅子前面)

===week 42: 10/17-10/23===
*3D列印原文:[http://www.3ders.org/articles/20160901-winsun-china-unveils-fully-3d-printed-public-toilets-at-da-yang-mountain-suzhou.html WinSun China unveils fully 3D printed public toilets in Suzhou]
*本週進度:We can imagine that if the feedback...trend might just take off!
*大意:我們可以想像，如果參訪的回饋是正面的關於最近的3D列印馬桶這可能會成為新的趨勢。
*獨輪車00:41~01:13
<videoflash>bGC0SBtOvg4</videoflash>
**feet shoulder with apart,both equeidistant from wheel(兩腳腳尖分開；兩側與車輪同寬)
**jump hight；come down vertically(跳高；垂直下來 補充:從獨輪車上方)
**practice on both sides(踩上兩邊踏板)

===week 43: 10/24-10/30===
*3D列印原文:[http://www.3ders.org/articles/20160822-meet-xpider-the-smallest-cutest-programmable-3d-printed-robot-spider-youve-ever-seen.html Meet Xpider, the smallest, cutest programmable 3D printed robot spider you've ever seen]
*本週進度:Roboeve, a Beijing-based...camera and facial recognition.
*大意:Roboeve是一群在北京的年輕工程師和工業設計師團隊，可能是我們所看過的最可愛的小型機器人之一。 這個機器人稱為Xpider，使用3D列印的技術，和一些有趣的功能，如相機和人臉識別。
*獨輪車01:13~6:02
<videoflash>bGC0SBtOvg4</videoflash>
**jump mount exercise#2 jump practice(起跳上車第二步跳上練習)
**1turn uni 1/2 way around(將獨輪車原地轉半圈)
**the spin(選轉)
**the jump(跳)

===week 44: 10/31-11/06===
*3D列印原文:[http://www.3ders.org/articles/20160822-meet-xpider-the-smallest-cutest-programmable-3d-printed-robot-spider-youve-ever-seen.html Meet Xpider, the smallest, cutest programmable 3D printed robot spider you've ever seen]
*本週進度:Roboeve was first founded as...spider robot in the world.
*大意:Roboeve是一群才剛畢業的機器人愛好者所成立的藉此來尋找著彼此的熱情。是由六個成員所組成(Binbin, Zongyi, Tianye, Louise, Cara和Anna)這個團隊成功的製造出一個小蜘蛛機器人這是最讓大家驚喜的。關於Xpider的身高是85mm(8.5cm)，重量只有150克，Roboeve甚至還要高價賣出全世界最小可以編輯程式的蜘蛛機器人。(看到這我就氣，他們仿造hexbug公司的產品居然還想高價賣出?)
*獨輪車00:00~02:00
<videoflash>zAuRQ0nDQnE</videoflash>
**how to one foot edle on a unicycle(如何單腳定車)
**edle normally(普通的訂車) 
**place foot on frame(把一隻腳放在邊架上)

===week 45: 11/07-11/13===
*3D列印原文:[http://www.3ders.org/articles/20160822-meet-xpider-the-smallest-cutest-programmable-3d-printed-robot-spider-youve-ever-seen.html Meet Xpider, the smallest, cutest programmable 3D printed robot spider you've ever seen]
*本週進度:The Xpider’s main feature is...screen for easy viewing.
*大意:Xpider的主要特徵是它的眼睛，靈感來自於怪獸電力公司的麥克華斯基，而且是由Intel Edison板和Curie提供電力，這個機器人可以使用手機或遊戲控制器遙控，讓使用者可用另一個獨特的視角，更特別的是它的大小很小，額外的它可以把攝影機拍到的
畫面同步傳輸到手機畫面上。
*獨輪車02:00~02:43
<videoflash>zAuRQ0nDQnE</videoflash>
**one foot idel with wall(扶牆單腳定輪)
**slightlly lean body to balance out motion(靠身體稍微的擺動)
**return foot to pedal(把腳放回踏板)

===week 46: 11/14-11/20===
*3D列印原文:[http://www.3ders.org/articles/20160822-meet-xpider-the-smallest-cutest-programmable-3d-printed-robot-spider-youve-ever-seen.html Meet Xpider, the smallest, cutest programmable 3D printed robot spider you've ever seen]
*本週進度:In addition to recording images...setting it on “roaming mode”.
*大意:除此之外也有拍照功能Xpider也可以運用它強大的識別程式Smart Node來了解環境狀況，這可以讓它偵測周圍物體及臉部識別，這代表你可以讓Xpider隨便亂走只要你將它設成"排回模式"
*獨輪車02:43~03:59
<videoflash>zAuRQ0nDQnE</videoflash>
**practice(練習)
**entry into one foot idling(換成單腳定車)

===week 47: 11/21-11/27===
*3D列印原文:[http://www.3ders.org/articles/20160822-meet-xpider-the-smallest-cutest-programmable-3d-printed-robot-spider-youve-ever-seen.html Meet Xpider, the smallest, cutest programmable 3D printed robot spider you've ever seen]
*本週進度:The robot can also...drag-and-drop neural network.
*大意:它也可以了解它的主人，如同Xpider網站上說的:有我識別人的能力你可以把我放在你的桌上只要一看到你我就會開心的跳舞，只要有人接近你我就會提醒你。你必須承認這個機器人夥伴有者非常可愛的特徵。Xpider也可以用一個簡單的神經網絡進行訓練
*獨輪車
<videoflash>6NT8upwdMQo</videoflash>

===week 48: 11/28-12/04===
*3D列印原文:[http://www.3ders.org/articles/20160822-meet-xpider-the-smallest-cutest-programmable-3d-printed-robot-spider-youve-ever-seen.html Meet Xpider, the smallest, cutest programmable 3D printed robot spider you've ever seen]
*本週進度:Of course, the Xpider...impressive and tiny Xpider.
*大意:當然Xpider是一個長期研發的果實，就在一年前的八月Roboeve轉向了Nerf TerraDrone(一個整體的兒童玩具)包括第一人稱視角，從那時開始Roboeve設計了許多的機器人而且也用3D列印做了在這之前的原形和微型Xpider。 
*獨輪車
<videoflash>6NT8upwdMQo</videoflash>

===week 49: 12/05-12/11===
*3D列印原文:[http://www.3ders.org/articles/20160822-meet-xpider-the-smallest-cutest-programmable-3d-printed-robot-spider-youve-ever-seen.html Meet Xpider, the smallest, cutest programmable 3D printed robot spider you've ever seen]
*本週進度:If you’re wondering...instructions through Wevolver.
*大意:如果你想知道如何將小3D列印的小蜘蛛機器人入手，那麼你很幸運，在北京的團隊這個月正推出Kickstarter的計畫。它們也似乎要准許開放Xpider的3D檔和Wevolver的建構說明。
*獨輪車
<videoflash>6NT8upwdMQo</videoflash>

===week 50: 12/12-12/18===
*3D列印原文:[http://www.3ders.org/articles/20161030-nano-racing-scale-down-racing-with-3d-printed-drones-that-fit-in-the-palm-of-your-hand.html|Nano-Racing scales down racing with 3D printed drones that fit in the palm of your hand]
*本週進度:While the 3D printing hobby...constant need for repairs.
*大意:現在3D列印的愛好者正在用許多大牌的應用程式，3D無人機已經有很多人做了技術已經是很普遍了
*獨輪車
<videoflash>6NT8upwdMQo</videoflash>

===week 51: 12/19-12/25===
===week 52: 12/26-01/01===
===week 01: 01/02-01/08===
===week 02: 01/09-01/15===
===week 03: 01/16-01/22===